Liquid Flow Meter/Electromagnetic Flow Meter (A+E 81F)
The operation of a emagnetic flowmeter or mag meter is based upon Faraday's Law, which states that the voltage induced across any conductor as it moves at right angles through a magnetic field is proportional to the velocity of that conductor.
--Large choice of liner materials suitable for drinking water, wastewater, chemicals and other liquids.
--Suitable for use in custody transfer applications.
--Measurement is independent of the flow profile.
--Abrasion and corrosion-resistant liners available.
--Electric conductivity of medium can be used for detection of product change.
--No additional pressure loss.
--No moveable parts and long working life.
--Two-way measurement system to detect the positive and negative flow.This magnetic flow meter can be used to measure the volume flow rate of conducting liquid and seriflux in closed pipes, such as pure water, sewage, all kinds of acid-alkali-salt solution, slurry, pulp, paper pulp and food liquids.
--Site LCD displays instantaneous flow, accumulative flow, flow rate.
--Various types provided according to specific conditions.
Applicable pipe size: DN 15-350 (1/2'' to 31-1/2'')
Applicable media: liquid with conductivity > 5 uS / cm
Velocity range: 0.2~8 m/s (0.66 to 26.2 ft/s)
Accuracy: 0.5, 1.0
Processing pressure: 1.0MPa, 1.6MPa, 4.0MPa, 16MPa optional
Processing temperature: -20 to 150°C, according to lining material
Ambient condition: -40 to 80°C, relative humidity <95%
Power supply: AC220V, 50Hz / DC24V
Display: backlight LCD
Operation: 4 light touch buttons
4-20mA, loading resistance 750Ω,
pulse, 0-3kHz, 5V,
Cable inlet/outlet: M20*1.5
Protection: transducer IP68, converter IP65
Tube material: carbon steel, stainless steel optional
Lining material: PTFE, rubber, polyurethane, F46, Fs optional
Electrode material: stainless steel, Hastelloy B, Hastelloy C, Titanium, Tantalum, Platinum optional
Grounding: made into a third electrode, same material with electrode
|Model||A+E 81F|| |
|K6||Ta / Iridium alloy|
|K7||wolfram carbide painted stainless steel|
|Output||F1||4-20mA with HART, load resistor<750 Ohm|
|Temperature||T1||-20 to 70 C|
|T2||0 to 100 C|
|T3||0 to 150 C|
|Power Supply||D1||220V AC, 50Hz|
|Installation Type||J1||integrate type|
|J3||anti-explosion integrate type|