Level Switch, Level Controller, Level Control Switch manufacturer / supplier in China, offering Paddle Wheel Rotate Solid Level Switch China Supplier, Non Contact Radar Level Transmitter, 3mm Random Error Radar Level Sensor (A+E 62LB) and so on.
|Min. Order / Reference FOB Price||1 Piece||US $10/ Piece|
|Payment Terms:||L/C, T/T|
|Structure:||All in One|
After power supplied, the motor in the level switch will keep working smoothly if there is no material contacted. When measuring media in container reaches the switch blade, the motor stop running. At the same time, the level switch will output a signal that the media level gets to setting position.
1) If the switch is installed at container side, it is recommended to give a horizontal downward angle, about 15 to 20°, to eliminate the strike from media.
2) The inlet of junction box must be facing ground, and cable fixed nut must be fastened.
3) Make sure the supply voltage is the same as switch marked.
4) The load of controlled circuit must be matched with contact interrupting capacity.
5) Keep far away from vibrating motors.
6) The switch should not be installed near the mouth of container. If the position is necessary, install a protective flap 200mm upon the switch.
7) The working situation should not consist of corrosive gas.
8) The process temperature should not be higher than switch marked temperature.
9) When install or maintain, keep power off.
|Type||A+E 72K A||A+E 72K B|
|Usage||measure the upper limit/lower limit|
|Rotation speed of the blades||5~6 rpm|
|Medium Density||≥ 0.2g / cm_(Relatively large blade)|
|Sensitivity||adjustable five-range (movement)|
|Ambient Temperature||-30 ~ +80 degree|
|Supply voltage||AC11OV \ AC220V \ 50/60Hz \ DC24V|
|Wire outlet||M18 × 1.5|
|Contact rating||AC220V 3A|
|Material temperature||-40 ~ +85 degree||-40 ~ +85 degree|
|Installation||flanged mounting||G1½ inches thread|
|Measuring range||Solid particle|
|Output signal||4-20 (mA)|
|Material||stainless steel, aluminum alloy|