LCD Electromagnetic Flow Meter for Industrial Waste Water
|FOB Price:||US $600 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $600/ Piece|
|Transport Package:||Wooden Case, Carboard Box|
|Payment Terms:||L/C, T/T|
- Model NO.: A+E 81F
- Main Application: Water, Wastewater, Corrosive Liquid/Gas
- Sensor: Tube/Flange
- Type: Electromagnetic Flow Meter
- Measuring Principle: Electrical Principles
- Certification: SGS, ISO
- Electrode: 316L, Hc, Hb, Ti, Ta
- Pressure: Max.16 MPa
- Ambient Temperature: Sensor 80 C(176 F), Converter 50 C(120 F)
- Consumption: <8W
- Trademark: AEAD
- HS Code: 9026100000
- Accuracy: ±0.6-1%
- Size: Dn 15-800
- Application: Industrial Production
- Measuring Media: Liquid
- Measurement Object: Closed Pipeline
- Velocity Range: 0.2~8m/S
- Output: 4-20mA DC, Pulse, RS485
- Media Temperature: Max 180 C (356 F)
- Power Supply: 220VAC or 24VDC
- Grounding: Made Into The Third Electrode
- Origin: Shanghai
--Site digital LCD displays instantaneous flow, accumulative flow, flow rate.
--Various types provided according to specific conditions.
|Item||LCD Electromagnetic Flow Meter for Industrial Waste Water|
|Applicable pipe size||DN 15-800 (1/2'' to 31-1/2'')|
|Applicable media||liquid with conductivity > 5 uS / cm|
|Velocity range||0.2~8 m/s (0.66 to 26.2 ft/s)|
|Process connection||flange, ANSI / GB / JIS, 1.0MPa, 1.6MPa, 4.0MPa, 16MPa optional|
|Processing temperature||-20 to 150°C, according to lining material|
|Ambient condition||-40 to 80°C, relative humidity <95%|
|Power supply||AC220V, 50Hz / DC24V / battery|
|Operation||4 light touch buttons|
|Signal output||4-20mA, loading resistance 750Ω,|
|pulse, 0-3kHz, 5V,|
|Protection||transducer IP68, converter IP65|
|Tube material||carbon steel, stainless steel optional|
|Lining material||PTFE, rubber, polyurethane, F46, Fs optional|
|Electrode material||stainless steel, Hastelloy B, Hastelloy C, Titanium, Tantalum, Platinum optional|
|Grounding||made into a third electrode, same material with electrode|
|Industries||chemical, environmental, metallurgical, pharmaceutical, papermaking, water supply and drainage, etc.|
Main performances of the lining materials
1.The most steady material in plastics which is resistible to boiling hydrochloric acid, vitriol fortis as well as strong alkali and organic impregnates.
Strong corrosive mediums such as strong acid and alkali
1.Have the same abrasion resistance with PTFE.
1.The same as PTFE.
1.Be of good elasticity, retractility and abrasion resistance.
Water, sewage and slurry, mineral serosity of low abrasion.
1.Be of good abrasion resistibility.
Applicable in mineral serosity, slurry and coal slurry of high abrasion.
Main performances of the electrode materials
Stainless steel SS316
Applicable in water, sewage and corrosive mediums. Widely used in industries of petrol, chemistry, carbamide, etc.
Having strong resistance to hydrochloric acid of any consistence which is below boiling point. Also resistible against vitriol, phosphate, hydrofluoricacid,organic acid etc which are oxidable acid, alkali and non-oxidable salt.
Be resistant to oxidable acid such as nitric acid, mixed acid as well as oxidable salt such as Fe+++,Cu++and sea water
Applicable in seawater, and kinds of chloride, hypochlorite salt, oxidable acid (including fuming nitric acid), organic acid, alkali etc. Not resistant to a pure reducing acid(such as sulphuric acid, hydrochloric acid)corrosion. But if acid contains antioxidant(such as Fe+++,Cu++) is greatly reduce corrosion.
Having strong resistance to corrosive mediums that is similar with glass. Almost applicable in all chemical mediums. Except for hydrofluoric acid, oleum and alkali.
Almost be applicable in all chemical mediums except for aqua fortis, ammonium salt.
If you are interested in LCD electromagnetic flow meter for industrial waste, please call our office at +86-(0)21-5869 6328.
Alternatively, you can send us an email or use the contact form which can be found on the contact page of our website.